Configure Log Reporting

Use this procedure to configure settings for system log and syslog reporting on Tunnel Concentrator.
Note

Note

For help with the fields and their settings, see Log Reporting Field Descriptions.
  1. Log in to Tunnel Concentrator.
  2. Go to Administration > Syslog.
  3. Set the System Log Level to the desired severity threshold for system log messages.
  4. Under Syslog, configure settings for syslog reporting:
    1. Set the Application Facility to the desired facility for syslog messages.
    2. Under Servers, assign up to three syslog servers. For each server, assign the following fields:
      • Server—Enter the IPv4 address of the syslog server.
      • Port—Enter the port on the syslog server for log reporting. The default is 514.
      • Protocol—Select UDP or TCP as the transport protocol for syslog reporting.
      • Level—Set the desired severity threshold for message reporting to this syslog server.
  5. Select Save.
9038993-00 Rev. AA